The solution of chiller failure
AMC
www.coolingtunnelsystem.com
2015-06-08 15:46:10
Any machine using the failure there will always be some, chiller is noexception, of course, what about chiller why low pressure fault? here we look atwater cooler expert gives some introduction.
Or leakage of refrigerant. If lack of refrigerant, only part of the leakage,then stop when equilibrium pressure may be high, and after power on low suctionpressure, exhaust gas pressure is low, compressor current is small, relativelyshort running time is low-voltage fault.
Lack of refrigerant flow, absorbing less heat, poor refrigerant evaporationeffect, saturated steam and cold, wet compress, expressed as units in and out of the water pressure difference becomes small, temperature, suction temperature islow, suction mouth frosting.
Evaporator jam, heat poor refrigerant does not evaporate, as the harm and lackof water, unlike the poor performance for inlet pressure, inlet Frost alsooccurs, and should be backwash units on a regular basis.
Chillers fault reason experts on the above introduction, chiller fails is aoften occur things, quality of the chiller chiller failure times will have a bigimpact, so you must consider when buying chiller chiller quality.