The role of Chinese production of chillers for plastic machinery

Industrial chiller works within  machine tank into a certain amount of water, the water is cooled by the refrigeration system, and then by the low-temperature cooling water pump feeding equipment to be cooled, frozen water temperature and then heat away back to the water tank, to achieve a cooling effect.
Chiller Plastic Machinery role: the chiller used in CNC machine tools, coordinate boring machines, grinding machines, machining centers, a combination of various types of machine tools and precision machine tool spindle cooling lubrication and hydraulic system transmission media, to precisely control the oil temperature to effectively reduce machine tool thermal deformation, improving machining accuracy.
Industrial chillers start, run:
1. Press dispatch instruction to open the gate to switch out of the water wells, shut down all other gate.
2. Before starting the pump check all joints should be no loose, hand rotation coupling, see chiller is flexible, if there is noise in the pump.
3. Before the pump starts, should take over the stuffing on the citation water lubricated rubber bearing, you can turn down until the water pump, there are drop out is appropriate, check the oil level in the pump bearing position, ensure around water, oil smooth road.
4. When the pump starts, beside the machine can not stop people, after the start should be at least five minutes to keep the machine check the situation and, if abnormal vibrations and sounds or abnormal water situation should immediately stop check Yun, never allow put into operation immediately after leaving the pump.