AMC Simple Belt Line narration
AMc
AMc
2017-05-16 09:57:34
In the belt line before running, the first to confirm the belt line equipment, personnel, transported goods are in a safe state; second, inspect the movement parts of normal without foreign body, check all electrical wiring is normal, normal to the belt line into operation. Finally, the difference between the supply voltage and the rated voltage of the equipment is not more than ± 5%. In the Belt line operation inputs, must do the following:
1. Close the total power switch to check whether the device is fed properly and the power LED is lit. Proceed to the next step after normal.
2. Close the power switches of the circuits to check whether normal. Normal state is: The device does not move, belt line running indicator light, inverter and other equipment, power indicator light, inverter display panel is normal (no fault code display).
3. In accordance with the process of starting the electrical equipment, the last electrical equipment started normal (motor or other equipment has reached normal speed, normal state) and then proceed to the next electrical equipment start-up.
In the operation of the Belt line, it is necessary to abide by the articles in the design of conveying goods, and abide by the design ability of the belt line. Second, attention should be paid to all kinds of personnel should not touch the movement of the Belt Line, non-professionals will not be arbitrarily exposed to electrical components, control buttons, etc. Finally, in the Belt line operation can not be the inverter after the circuit breakers, such as to determine the need for maintenance, must stop the frequency of operation in the case of possible, or may damage the inverter. The Belt Line runs stop, pressing the stop button to stop the system all after the total power can be cut off.
1. Close the total power switch to check whether the device is fed properly and the power LED is lit. Proceed to the next step after normal.
2. Close the power switches of the circuits to check whether normal. Normal state is: The device does not move, belt line running indicator light, inverter and other equipment, power indicator light, inverter display panel is normal (no fault code display).
3. In accordance with the process of starting the electrical equipment, the last electrical equipment started normal (motor or other equipment has reached normal speed, normal state) and then proceed to the next electrical equipment start-up.
In the operation of the Belt line, it is necessary to abide by the articles in the design of conveying goods, and abide by the design ability of the belt line. Second, attention should be paid to all kinds of personnel should not touch the movement of the Belt Line, non-professionals will not be arbitrarily exposed to electrical components, control buttons, etc. Finally, in the Belt line operation can not be the inverter after the circuit breakers, such as to determine the need for maintenance, must stop the frequency of operation in the case of possible, or may damage the inverter. The Belt Line runs stop, pressing the stop button to stop the system all after the total power can be cut off.